Hva er Fiat Panda eller Lada 2105?

6 grunner for å kjøpe Fiat Panda

1. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

2. Det er bedre kompresjon
   15% eller 1.5 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   10 kompresjon

   8.5 kompresjon

3. Stempelslag lenger
   7% eller 6 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   86 mm Stempelslag

   80 mm Stempelslag

4. Mer sylinderboring
   2% eller 1.5 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   80.5 mm sylinderboring

   79 mm sylinderboring

5. Mer motorkraft
   13% eller 11 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   85 hk motorkraft

   74 hk motorkraft

6. Mer dreiemoment
   21% eller 31 Nm. The higher the torque, the faster the acceleration.
   

   145 Nm @ 1900 rot/min. dreiemoment

   114 Nm @ 3400 rot/min. dreiemoment

2 grunner for å kjøpe Lada 2105

1. Mer sylindere
   2 sylinder mer. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   2 sylindere

   4 sylindere

2. Mer motor kapasitet
   44% eller 694 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   875 cm3 motor kapasitet

   1569 cm3 motor kapasitet

Neutrale grunner Fiat Panda og Lada 2105

1. Motor posisjon
   

   Foran, tverrgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   På linje Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Flerpunktsinjeksjon

   Enkeltpunktsinjeksjon