Hva er Mitsubishi i eller Lada 2104?

2 grunner for å kjøpe Mitsubishi i

1. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

2. Det er bedre kompresjon
   3% eller 0.3 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   8.8 kompresjon

   8.5 kompresjon

6 grunner for å kjøpe Lada 2104

1. Mer sylindere
   1 sylinder større. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   3 sylindere

   4 sylindere

2. Stempelslag lenger
   18% eller 14.6 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   65.4 mm Stempelslag

   80 mm Stempelslag

3. Mer sylinderboring
   14% eller 10.6 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   65.4 mm sylinderboring

   76 mm sylinderboring

4. Mer motorkraft
   10% eller 7 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   64 hk motorkraft

   71 hk motorkraft

5. Mer dreiemoment
   10% eller 10 Nm. The higher the torque, the faster the acceleration.
   

   94 Nm dreiemoment

   104 Nm @ 3400 rot/min. dreiemoment

6. Mer motor kapasitet
   55% eller 791 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   659 cm3 motor kapasitet

   1450 cm3 motor kapasitet

Neutrale grunner Mitsubishi i og Lada 2104

1. Motor posisjon
   

   Bak, tverrgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   På linje Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Flerpunktsinjeksjon

   Forgasser