Hva er Ferrari 360 eller Lada 2104?

7 grunner for å kjøpe Ferrari 360

1. Mer sylindere
   4 sylinder mer. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   8 sylindere

   4 sylindere

2. Mer ventiler per sylinder
   3 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   5 ventiler per sylinder

   2 ventiler per sylinder

3. Det er bedre kompresjon
   23% eller 2.5 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   11 kompresjon

   8.5 kompresjon

4. Mer sylinderboring
   11% eller 9 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   85 mm sylinderboring

   76 mm sylinderboring

5. Mer motorkraft
   82% eller 329 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   400 hk motorkraft

   71 hk motorkraft

6. Mer dreiemoment
   72% eller 269 Nm. The higher the torque, the faster the acceleration.
   

   373 Nm @ 4750 rot/min. dreiemoment

   104 Nm @ 3400 rot/min. dreiemoment

7. Mer motor kapasitet
   60% eller 2136 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   3586 cm3 motor kapasitet

   1450 cm3 motor kapasitet

1 grunn for å kjøpe Lada 2104

1. Stempelslag lenger
   1% eller 1 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   79 mm Stempelslag

   80 mm Stempelslag

Neutrale grunner Ferrari 360 og Lada 2104

1. Motor posisjon
   

   Midt, tverrgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   V Motor Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Flerpunktsinjeksjon

   Forgasser