Hva er Ferrari 599 eller Lada 2105?

7 grunner for å kjøpe Ferrari 599

1. Mer sylindere
   8 sylinder mer. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   12 sylindere

   4 sylindere

2. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

3. Det er bedre kompresjon
   24% eller 2.7 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   11.2 kompresjon

   8.5 kompresjon

4. Mer sylinderboring
   14% eller 13 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   92 mm sylinderboring

   79 mm sylinderboring

5. Mer motorkraft
   88% eller 546 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   620 hk motorkraft

   74 hk motorkraft

6. Mer dreiemoment
   81% eller 494 Nm. The higher the torque, the faster the acceleration.
   

   608 Nm @ 5600 rot/min. dreiemoment

   114 Nm @ 3400 rot/min. dreiemoment

7. Mer motor kapasitet
   74% eller 4430 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   5999 cm3 motor kapasitet

   1569 cm3 motor kapasitet

1 grunn for å kjøpe Lada 2105

1. Stempelslag lenger
   6% eller 4.8 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   75.2 mm Stempelslag

   80 mm Stempelslag

Neutrale grunner Ferrari 599 og Lada 2105

1. Motor posisjon
   

   Front, langsgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   V Motor Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Flerpunktsinjeksjon

   Enkeltpunktsinjeksjon