Hva er Suzuki Alto eller Lada 2105?

2 grunner for å kjøpe Suzuki Alto

1. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

2. Det er bedre kompresjon
   26% eller 3 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   11.5 kompresjon

   8.5 kompresjon

6 grunner for å kjøpe Lada 2105

1. Mer sylindere
   1 sylinder større. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   3 sylindere

   4 sylindere

2. Stempelslag lenger
   15% eller 11.8 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   68.2 mm Stempelslag

   80 mm Stempelslag

3. Mer sylinderboring
   19% eller 15 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   64 mm sylinderboring

   79 mm sylinderboring

4. Mer motorkraft
   34% eller 25 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   49 hk motorkraft

   74 hk motorkraft

5. Mer dreiemoment
   49% eller 56 Nm. The higher the torque, the faster the acceleration.
   

   58 Nm @ 4000 rot/min. dreiemoment

   114 Nm @ 3400 rot/min. dreiemoment

6. Mer motor kapasitet
   58% eller 911 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   658 cm3 motor kapasitet

   1569 cm3 motor kapasitet

Neutrale grunner Suzuki Alto og Lada 2105

1. Motor posisjon
   

   Foran, tverrgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   På linje Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Flerpunktsinjeksjon

   Enkeltpunktsinjeksjon