Hva er Audi A1 eller Lada 2105?

4 grunner for å kjøpe Audi A1

1. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

2. Det er bedre kompresjon
   19% eller 2 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   10.5 kompresjon

   8.5 kompresjon

3. Mer motorkraft
   36% eller 42 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   116 hk motorkraft

   74 hk motorkraft

4. Mer dreiemoment
   43% eller 86 Nm. The higher the torque, the faster the acceleration.
   

   200 Nm @ 2000-3500 rot/min. dreiemoment

   114 Nm @ 3400 rot/min. dreiemoment

4 grunner for å kjøpe Lada 2105

1. Mer sylindere
   1 sylinder større. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   3 sylindere

   4 sylindere

2. Stempelslag lenger
   4% eller 3.6 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   76.4 mm Stempelslag

   80 mm Stempelslag

3. Mer sylinderboring
   6% eller 4.5 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   74.5 mm sylinderboring

   79 mm sylinderboring

4. Mer motor kapasitet
   36% eller 570 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   999 cm3 motor kapasitet

   1569 cm3 motor kapasitet

Neutrale grunner Audi A1 og Lada 2105

1. Motor posisjon
   

   Foran, tverrgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   På linje Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Direkte injeksjon

   Enkeltpunktsinjeksjon