Hva er Porsche 911 eller Lada 2105?

7 grunner for å kjøpe Porsche 911

1. Mer sylindere
   2 sylinder mer. The more cylinders, the greater the engine stability with less vibration. Engine efficiency increases due to shorter pauses between strokes.
   

   6 sylindere

   4 sylindere

2. Mer ventiler per sylinder
   2 flere ventiler per sylinder. The more valves, the better the fuel combustion. This provides more power, greater torque, and higher engine efficiency.
   

   4 ventiler per sylinder

   2 ventiler per sylinder

3. Det er bedre kompresjon
   15% eller 1.5 The higher the compression ratio, the less fuel is required to achieve the same power. This can affect the engine's efficiency.
   

   10 kompresjon

   8.5 kompresjon

4. Mer sylinderboring
   13% eller 12 mm The larger the cylinder bore, the better the combustion chamber fills. This provides power but can also increase engine emissions.
   

   91 mm sylinderboring

   79 mm sylinderboring

5. Mer motorkraft
   84% eller 376 hk The greater the vehicle's power, the better the acceleration. Also, powerful cars provide higher speeds.
   

   450 hk motorkraft

   74 hk motorkraft

6. Mer dreiemoment
   79% eller 436 Nm. The higher the torque, the faster the acceleration.
   

   550 Nm @ 2150-5000 rot/min. dreiemoment

   114 Nm @ 3400 rot/min. dreiemoment

7. Mer motor kapasitet
   47% eller 1412 cm³ mer. The greater the engine capacity, the lower the wear and tear. Larger engine capacities provide longer vehicle lifespans.
   

   2981 cm3 motor kapasitet

   1569 cm3 motor kapasitet

1 grunn for å kjøpe Lada 2105

1. Stempelslag lenger
   4% eller 3.6 mm The longer the piston stroke, the better the engine’s fuel combustion efficiency. This reduces fuel consumption and creates a more environmentally-friendly engine.
   

   76.4 mm Stempelslag

   80 mm Stempelslag

Neutrale grunner Porsche 911 og Lada 2105

1. Motor posisjon
   

   Bak, langsgående Motor posisjon

   Front, langsgående Motor posisjon

2. Sylinderes plassering
   

   Boxer Sylinderes plassering

   På linje Sylinderes plassering

3. Drivstofftilførsel
   

   Direkte injeksjon

   Enkeltpunktsinjeksjon